Waterjet Cutting Machine BP-C

Technical Data



BP-C 4020X=4.000mm Y=2.000mm Z=200mm



Maximum thickness of the workpiece200mm
Maximum permitted load790Kg/m2
Maximum number of bridges1
Number of waterjet cutting heads1 to 2
Maximum simultaneous positioning speed70m/min
Maximum cutting speed20m/min
Machine tolerance VDL/DGQ3441+-0,05mm/m
Repeatability precision+-0,025mm/m

BP-C Series

The BP-C series high pressure waterjet cutting machine has been developed as versatile cutting machine that is easy to install and transport. It fulfils the most demanding cutting requirements at an unbeatable price-performance ratio.

This cutting machine range offers customers the possibility to install it themselves without having to resort to installation or assembly by a specialist. Customers can directly setup the waterjet cutting machine quickly and easily.

The TCI Cutting BP-C high pressure waterjet cutting machine provides a functional, accurate and cost effective platform suitable for all standard applications. Maximum performance with minimal investment and maintenance.




BP-C 4020X=4.000mm Y=2.000mm Z=200mm




Maximum thickness of the part200mm
Maximum permitted load of the parts790Kg/m2
Maximum bridge number1
Number of water jet cutting heads1 a 2
Maximum simultaneous positioning speed70m/min
Maximum cutting speed20m/min
Machine tolerance VDL/DGQ3441+-0,05mm/m
Repetition precisión cutting+-0,025mm/m
Máquina de corte por chorro de agua a presión waterjet BP-C

360º View


Water jet cutting can be classified as a mechanical method.

The energy generated by the movement of the water at a speed three times higher than the speed of sound is utilised both for pure water cutting and for abrasive cutting and is then applied to the part being cut in order to produce micro-erosion.

Water jet cutting does not generate residual heat at the cutting edge and thus the physical properties of the material are not changed.

esquema de funcionamiento bombas alta presion para el corte con agua


This method is suitable for cutting fabric, elastomers, fibres, plastics, food stuffs, paper and other materials and is based on the use of water pressure up to 6,500 bar with an equivalent speed  of 800-1000 m/sec, passing through a diamond orifice (with a diameter of tenths of a millimetre) targeted on the material to be cut.  In this way, the potential energy is converted into kinetic energy, resulting in a waterjet with speeds capable of cutting the material

cabezal de corte agua presion con abrasivo


With materials for which pure water cutting is not sufficient, abrasive cutting is required. Using this method, a fine grain abrasive material is added to the water. The union of water, air and abrasive takes place in the mixing chamber to further accelerate and focus it. The result of this method is the production of a powerful waterjet, with the capacity to cut, separate or perforate materials of varying thickness and density, such as metal, ceramics, natural stone or tempered glass, among others.

cabezal de corte agua presion con abrasivo

Technological advantages of waterjet cutting machine

Intelligent Cutting Head

Cabezal 2D máquina corte por chorro de agua a presión waterjet

  • Anti-collision system
  • Cut control
  • Height control system
  • Laser positioning
  • Automatic abrasive regulation
  • Dual cutting system
  • Automated sheet detection
  • Online assistance
  • Pneumatic percussion counter
Installation options

waterjet cutting machine

  • Double regulable cutting head
  • Jet control (conicity suppression)
  • 3D cutting head
  • Sludge extraction system
  • Underwater cutting
  • Outline cutting vector on the machine
Waterjet & Plasma Support

Máquina de corte waterjet y corte plasma HD TCI Cutting

  • Use both cutting technologies on one workpiece on the waterjet machine
  • Outline cutting using plasma
  • Plasma marking
  • Range of HD plasma cutting power
Pressure and Technology

Bombas máquina de corte por chorro de agua a presión waterjet TCI Cutting

  • 4100 bar intensifier pump
  • 6500 intensifier pump
  • 4100 bar direct drive pump
Characteristics of the waterjet cutting machine series – Waterjet BP-C