Plasma Cutting Machine Sparkline-C

Technical Data

MODELS

DIMENSIONS

Sparkline-C 3020 X=3.000mm Y=2.000mm Z=200mm
Sparkline-C 4020 X=4.000mm Y=2.000mm Z=200mm

CHARACTERISTICS

TECHNICAL DATA

Maximum thickness of the workpiece 200mm
Maximum permitted load 790Kg/m2
Maximum number of bridges 1
Number of Plasma cutting heads 1
Maximum simultaneous positioning speed 70m/min
Maximum cutting speed 20m/min
VDL/DGQ3441 machine tolerance +-0,05mm/m
Repeatability precision +-0,025mm/m

Sparkline-C  Series

The Sparkline-C series “HD Plasma” high definition Plasma cutting machine has been developed to suit clients with a high demand for cutting quality at a competitive price.

The compact design of this plasma cutting machine, enables high productivity within a small space.

MODEL TYPES

MODEL

DIMENSIONS

Sparkline-C 3020 X=3.000mm Y=2.000mm Z=200mm
Sparkline-C 4020 X=4.000mm Y=2.000mm Z=200mm

TECHNICAL DATA

DATA

VALUES

Maximum thickness of pieces 200mm
Maximum permitted load of pieces 790Kg/m2
Maximum number of bridges 1
Number of Plasma cutting heads 1
Maximum simultaneous positioning speed 70m/min
Maximum cutting speed 20m/min
VDL/DGQ3441 machine tolerance +-0,05mm/m
Repetition precision +-0,025mm/m
Máquina corte plasma

360º View

HD Plasma Cutting

The basis of any Plasma cutting process is the increased heat (energy) to cause the “ionization” of gas. This ionized gas with its electrical conductivity properties, allows the cutting process.

 

plasma HD

Ionization of the gases generates an equal number of free electrons and positive ions and is thus electrically neutral.  When this process takes place, the gas acts as an electrical conductor and is capable of transporting the current.

Plasma cutting is a process which uses a calibrated torch to constrict the ionized gas which is produced at very high temperatures, in order to control it and to use it to melt and cut conductive metals.

In all plasma cutting system the arc energy density is determined by the torch, and more specifically by the relation between the flow crossing the nozzle orifice and the cutting current. In conventional machines this density is between 15 and 25 Amp/mm2, as opposed to the high definition system of between 65 and 90 Amp/mm2.

Corte plasma hd

Advantages are a greater plasma arc density, a much faster plasma gas speed, greater precision, higher cutting quality and less burring.

Power output Installation

130A / 260 A.

Technological advantages Plasma cutting machine

Intelligent Cutting Head

Plasma cutting machine

  • Anti collision system
  • Height control system
  • Laser positioning
  • Online assistance
Installation Options

Plasma cutting machine

  • Cassette system for pipe and tube cutting
  • Underwater cutting
  • Outline cutting vector on the machine
  • Pneumatic marking
WaterJet & Plasma Dual Function

Máquina de corte waterjet y corte plasma HD TCI Cutting

  • Use both cutting technologies on one workpiece on the same machine
  • Outline cutting using plasma
  • Plasma marking system
  • Various HD Plasma power outputs
Instalable power

Fuente plasma máquina de corte por plasma HD

  • Hyperterm HPR 130A
  • Hyperterm HPR 260A
Characteristics of the TCI Cutting Sparkline series High Definition Plasma Cutting Machine